artwork

The Green

Alright, so it’s been 9 months since my last post. Quick update with some photos of the Green tele I made for my friend. DSC_8323DSC_8325DSC_8339

Really happy with how this turned out.

Pickups are: Bridge – Irongear Hot Slag & Neck – Irongear Rolling Mill. Both great pickups, and the coil split (or tap?) means you can turn them into single coils. The Hot Slag pickup as a single coil sounds great. A really sharp, aggressive single coil sound. In full humbucker mode it is a powerful pickup. Highly recommend.

I have parted ways with this guitar now. It was a great feeling giving this to a close friend. He really loves it, and I really miss it! He lives abroad so I haven’t seen it since.

Anyway, it has a new home now. One day I’ll see it again.

The Latest part 3

I’ve put together a video of applying the stain onto the back and front of the guitar and applying the logo onto the headstock via water transfer.

Yes, essentially it is watching paint dry for the first half but I’ve added some music courtesy of BearWolves to liven it up a little.

If I make more videos in the future I promise they will be more interesting.

For those interested, here you go:

 

 

The Latest part 2

This guitar was built as a gift for a close friend. It was kept a surprise, he had no idea I was even putting another guitar together and I deliberately didn’t post about it on here to keep it away from finding anything out.

It is really fun trying to design a guitar for someone else; to think about their style of playing, the music they listen to and what they might be inspired to write on it. It got me thinking that a standard T-type guitar just wouldn’t cut it. I had to dual humbucker this guitar to give it the muscles to create some hard hitting riffs. This was going to be a rock beast straight from the get go.

Step 1: route out a socket large enough for a humbucker in the bridge position. Exhibit A:

20150919_125637Not my neatest job. This blog is just as much about highlighting my mistakes and learning as it is about detailing and showcasing my projects. I hope people learn from these small mistakes that have big consequences.

I didn’t actually have the humbucker I was planning to install at the time of this routing job, which meant I didn’t have the reference point for whether the hole was big enough and whether the position was perfect. I didn’t pay attention to this and just ploughed on with the project which it turns out didn’t harm anything, it just meant that after I had dyed it, lacquered it up and finished it, I then realised I had to go back to do some more routing! A potentially messy job but I’m glad to say it didn’t actually affect anything. So the take-away message: plan this all in advance! Get all your bits, measurements and hardware jobs ready first.

Back to the project:

So I had the dual humbucker sockets ready. I sanded it down and as the body was bought pretty much complete, I just had to dye it. I knew there was only one colour for this. A badass green to match the badass tone this beast would give.

Stain 1

20150919_134416

Stain 1 – back

20150919_164535

Stain 2

20150926_130317

The colour got more and more intense with each stain. It was perfect, exactly what I wanted. Once each stain dried the colour faded quite a lot. These photos are immediately after the dye was applied. You can see some darker patches. I put this down to the basswood’s qualities but a light sanding with steel wool between the stains really helped even things out.

More to come in the next post!

 

 

The Grey Transformation

I’m very excited about this post. I’ve wanted a custom painted/artwork guitar for a while. When I was 18 I tried painting a strat copy guitar in a similar style to Eric Clapton’s SG from Cream. That was my first experience of customising a guitar. Now, it has been done properly and professionally.

A few posts before this one you will find “the Grey”. A beast of a tele that looked badass and has had on-stage experience. It was a trustworthy axe until the white one came along which, quite frankly, I preferred. They grey has a cool story behind it. Check out the 2 part post about it further down my blog.

Here it is, stripped back of all the electronics and hardware on the body.

stripped back

It was posted back to me in a box that looks like this:

1066_1768739476689776_7003238135865263784_n

I was super excited to open it. It was all I thought about while staring at the clock at work, waiting to come home and check it out.

And here is a little teaser of the final product:

DSC_6033

More to come!